Thank you for purchasing the Professor Motor Commercial
Track "Gold" Model (PMTR2060)
Intended application : 1/24 home & commercial track
racing, through Group 12
This model features the following high quality features
· New shorter trigger stroke for faster trigger response
· High performance semiconductors with 400 amp surge rating
· Self resetting electronic circuit breaker system (in brake circuit)
· Variable Sensitivity system with over 20,000 possible settings
· Dual aluminum heat sink, unique internal handle-protected mounting
· New "Silver Series" ultra robust design features (see web site for
information)
· Low friction brass/steel trigger bushing system
· Extra long, heavy duty 13 gage super flexible, high temp silicone controller
leads
· Solid copper alligator clips with color coded vinyl insulating boots
· High impact polycarbonate plastic molded handle
· Fully electronic semiconductor design
· Low friction graphite impregnated wiper button with brass alloy wiper
contacts
· Stainless steel hardware throughout
· Upgradeable modular design
Use & Care Instructions
· To activate the variable sensitivity system - back off all of the adjustment
knobs ½ turn from the "bottomed" position. Start by turning in the
front one (nose of controller) until bottomed & continue left to right until
suitable sensitivity is achieved.
· To deactivate the variable sensitivity "switches" back off the
knobs from the bottomed position about ½ to ¾ turn.
· Caution ! : Be careful when placing the controller down on a commercial track
to avoid contact with the wiring connections to the track. The silver knobs for
the sensitivity system and the heat sink (inside the handle) are electrically
active and a short circuit could result.
· Caution ! : If connected incorrectly to power, permanent damage can result.
· Caution ! : External sensitivity knobs may get very hot if high-powered
motors are used.
Optional upgrades for this controller
· Variable Brakes (PMTR2038)
· Reversing Switch (PMTR2036)
· Power Relay system (PMTR2037)
· Power pilot light system for power and polarity indication (PMTR2030)
Regular maintenance
· Clean wiper button with 400-500 grit emery paper (slide paper under wiper)
· Clean brass contacts using 600 grit emery paper (carefully remove all brass
dust)
· Oil the trigger pivot bushing (top & bottom) with a light machine oil
controller tech tips & information