Part No.

Picture

Price

PLAFIT 1/32 Super32 Universal Chassis & Related Accessories

PL3300U

$68.00

Plafit Super32 RTR Chassis with Rabbit Motor - Includes body Mounting Sponge Rubber and Front/Rear Plastic Shims to Adjust Ride Height - Top View : link  Bottom View : link  Instructions : link 

To ORDER please click here to use our online shopping system.

PL3300UK

$49.80

Plafit Super32 Chassis KIT - Includes screw kit, body Mounting Sponge Rubber,  Neodymium Traction Magnet, Main Chassis Plate and all basic aluminum parts to build the chassis.  NOT INCLUDED are bushings/bearings, motor, gears, guide, axles, wheels & tires. 

To ORDER please click here to use our online shopping system.

PL3301

$13.60

Plafit Super32 Chassis Main Chassis plate - Standard Length - Coated Brass

To ORDER please click here to use our online shopping system.

PL1214

$3.90

Plafit Body Mounting Sponge Rubber - 2 pcs. / package - a generous 3 1/2  x 5 3/4 x 0.20 inch (89 x 146 x 5mm) per section size to accommodate mounting of 1/32 or 1/24 scale slot cars -  can be used with other brands of body mounting systems such as H&R or Pro Track 

To ORDER please click here to use our online shopping system.

PL3302U

$8.65

Plafit Super32 Chassis Adjustable Front Bearing / Bushing Holders - 1 Left Hand & 1 Right Hand / package - Billet machined aluminum  

To ORDER please click here to use our online shopping system.

PL3303

$1.92

Plafit Super32 Chassis Adjustable Guide Holder - 1 pc. / package - Stamped Aluminum  

To ORDER please click here to use our online shopping system.

PL3304

PL3304B

PL3304C

$5.10

$5.30

$5.30

Plafit Super32 Chassis Front Axle Base - 2 pcs. / package - Billet machined Aluminum with threaded mounting holes - PL3304 Standard Height - PL3304B +0.5mm (0.020") higher & PL3304C +1.0mm (0.040") higher than standard  

To ORDER please click here to use our online shopping system.

PL3304S02

PL3304S03

PL3304S04

PL3304S05

PL3304S08

PL3304S10

$3.38

Plafit Super32 Plastic Spacer Shims - For fine adjustment of front axle base height and subsequent ride height and ground clearance - "02" 0.2mm (0.008"), "03" 0.3mm (0.012"), "04" 0.4mm (0.016"),"05" 0.5mm (0.02"), "08" 0.8mm (0.032") & "10" are 1.0mm (0.040") thick - 1 set 4 spacers / package  

To ORDER please click here to use our online shopping system.

PL3305

$5.45

Plafit Super32 Chassis "T Plate" - Standard Length - Machined Aluminum Stamping  

To ORDER please click here to use our online shopping system.

PL3305B

$5.64

Plafit Super32 Chassis "T Plate" - Extra Long Length - Machined Aluminum Stamping  

To ORDER please click here to use our online shopping system.

PL3306

$6.85

Plafit Super32 Chassis Aluminum Body Mount Plates - 2 pcs. / package 

To ORDER please click here to use our online shopping system.

PL3307

$3.13

Plafit Super32 "Slide Mount" Adjustable Body Mounts - 2 pcs. / package - formed aluminum  

To ORDER please click here to use our online shopping system.

PL3307B

$4.46

Plafit Super32 Side Body Mounting Plates - 1 Left & 1 Right Hand / Package - Coated Brass 

To ORDER please click here to use our online shopping system.

PL3307B1

$1.01

Plafit Super32 Chassis Aluminum 1mm (0.040") Spacers for use with 3307B Side Body Mounting Plates 

To ORDER please click here to use our online shopping system.

PL3307B2

$1.38

Plafit Super32 Chassis Aluminum Extension Plates to allow wider body mounting capability when needed 

To ORDER please click here to use our online shopping system.

PL3308

$5.00

Plafit Super32 Chassis Adjustable Motor Mounting Bracket - Billet Machined Aluminum  

To ORDER please click here to use our online shopping system.

PL3309CU

$11.83

Plafit Super32 Chassis Left & Right Hand Rear Bushing / Bearing Holders - 1mm (0.040") Higher Than Standard Holders - Billet Machined Aluminum - Threaded for chassis mount - Use PL3309S Plastic Shims for fine adjustment of height 

To ORDER please click here to use our online shopping system.

PL3309S02

PL3309S03

PL3309S04

PL3309S05

PL3309S08

PL3309S10

$3.67

Plafit Super32 Chassis Plastic Spacer Shims - For fine adjustment of rear bearing / bushing holder height and subsequent ride height and ground clearance - "02" 0.2mm (0.008"), "03" 0.3mm (0.012"), "04" 0.4mm (0.016"), "05" 0.5mm (0.02"), "08" 0.8mm (0.032") & "10" are 1.0mm (0.040") thick - 1 set 4 spacers / package  

To ORDER please click here to use our online shopping system.

PL3309U

$11.60

Plafit Super32 Chassis Left & Right Hand Rear Bushing / Bearing Holders - Standard Height Holders - Billet Machined Aluminum - Threaded for chassis mount - Use PL3309S Plastic Shims for fine adjustment of height

To ORDER please click here to use our online shopping system.

PL3310

$4.28

Plafit Super32 Chassis Aluminum Subframe Plate - Standard Type

To ORDER please click here to use our online shopping system.

PL3310T

$4.90

Plafit Super32 Chassis Aluminum Subframe Plate - Adjustable Type  

To ORDER please click here to use our online shopping system.

PL3311

$.77

Plafit Super32 Chassis Aluminum Adjustable Motor Brace  

To ORDER please click here to use our online shopping system.

PL3312

$5.98

Plafit Super32 Chassis Screw Set - Includes Brass Guide Nut, Setscrews, Small & Large Springs, Plain & Lock Washers, Long & Short Flathead M2 Screws, M2 Nuts, Short & Long Aluminum Axle Spacers  

To ORDER please click here to use our online shopping system.

PL3313

$2.42

Plafit Super32 Chassis Neodymium Magnet Holder - Billet Machined Aluminum  

To ORDER please click here to use our online shopping system.

PL3316

$1.38

Plafit Super32 Chassis Neodymium Traction Magnet - 3 x 6 x 15mm (0.11x0.23x0.58') - 1 pc. / package.  SAFETY WARNING ! - These small magnets are very powerful and can cause serious injury or death if swallowed - keep away from small children 

To ORDER please click here to use our online shopping system.

PL3331U

$6.19

Plafit Super32 Chassis Front / Rear Aluminum Wheels for 3/32" (2.37mm) axle - 15.5mm diameter (scale 15") x 9.5mm (3/8") wide.  2 wheels per package - short hub with setscrews and small diameter ring machined around axle diameter for low friction

To ORDER please click here to use our online shopping system.

PL3332U

$6.19

Plafit Super32 Chassis Rear Aluminum Wheels for 3/32" (2.37mm) axle - same as 3331U except slight taper for improved traction - 15.5mm diameter (scale 15") x 9.5mm (3/8") wide.  2 wheels per package - short hub with setscrews and small diameter ring machined around axle diameter for low friction

To ORDER please click here to use our online shopping system.

PL3344M

$2.58

Plafit Super32 Chassis Front / Rear Rubber Tires - 2 pcs. / package - 9.5mm (3/8") Wide - Medium Hardness (Shore A 50 Durometer)

To ORDER please click here to use our online shopping system.

PL3344S

$2.77

Plafit Super32 Chassis Rear Rubber Tires - 2 pcs. / package - 9.5mm (3/8") Wide - Soft Compound for More Grip (Shore A 20 Durometer)

To ORDER please click here to use our online shopping system.

PL8203C

PL8203D

PL8203E

PL8203F

PL8203G

$1.82

$1.82

$2.12

$2.12

$2.12

Plafit Stainless Steel 3/32" (2.37mm) Axle - 2 pcs. / package - highly polished for low friction - "C" 42.5mm (1.67"), "D" 45.0mm (1.77"), "E" 47.5mm (1.87"), "F" 50.0mm (1.97 ") & "G" 52.5mm (2.07 ") Length  

To ORDER please click here to use our online shopping system.

PL8221U

$2.48

Plafit Axle Spacer Set for 3/32" (2.37mm) axles of any brand - steel washers and tubular  spacers of differing thicknesses

To ORDER please click here to use our online shopping system.

PL8243

$1.49

Plafit "Oilite" Oil Impregnated Bronze Bushings - 2 pcs. / package - 3/32" (2.38mm) Inside Diameter and 3/16" (4.69mm) Outside diameter Flanged - Small diameter raised portion around axle diameter for low friction

To ORDER please click here to use our online shopping system.

PL8262

$15.97

Plafit High Precision Ball Bearings - 2 pcs. / package - 3/32" (2.38mm) Inside Diameter and 3/16" (4.69mm) Outside diameter Flanged

To ORDER please click here to use our online shopping system.

PL8501A

PL8501B

PL8501C

PL8501D

PL8501E

$1.05

Plafit Press-Fit Plastic Pinion Gears for any standard 2mm shaft motor - Metric Spec - PL8501A 8 Tooth, PL8501B 9 Tooth, PL8501C 10 Tooth, Pl8501D 12 Tooth & PL8501E 14 Tooth - 4 Pinions Gears / package - May be used with motor shafts that are splined or smooth

To ORDER please click here to use our online shopping system.

PL8511A

PL8511B

PL8511C

PL8511D

PL8511E

$2.19

Plafit Press-Fit Brass Pinion Gears for any standard 2mm shaft motor - Metric Spec - PL8511A 8 Tooth, PL8511B 9 Tooth, PL8511C 10 Tooth, Pl8511D 11 Tooth & PL8511E 12 Tooth - 2 Pinions Gears / package - May be used with motor shafts that are splined or smooth

To ORDER please click here to use our online shopping system.

PL8543B

PL8543C

PL8543CX

PL8543DX

$4.45

Plafit metric spec aluminum hub setscrew spur gear for 3/32" (2.37mm) axle - 1 pc. / package - small diameter ring machined around axle diameter for low friction - PL8543B 32 Tooth, PL8543C 33 Tooth, PL8543CX 34 Tooth & PL8543DX 35 Tooth  

To ORDER please click here to use our online shopping system.

PL8612A

PL8612B

PL8612C

$2.29

$2.49

$3.39

Plafit Plastic Guide Spacers for 3/16" post (4.7mm) guides  - 20 pcs. / package - use to optimize guide depth and adjust ride height of chassis for best handling.  "A" 0.13mm (0.005"), "B" 0.25mm (0.010") and "C" 0.50mm (0.020") thickness

To ORDER please click here to use our online shopping system.