
Professor Motor is proud to offer some of the finest quality components for 1/32 scratch building. Listed below are the parts currently in our catalog. Larger color illustrations can be found by clicking the part number link. Thank you for your interest in components for 1/32 scratch building distributed by Professor Motor.
Please check stock status in our online shopping if you would like to determine if an item is immediately available.
Part Number |
Picture |
Price |
1/32 Scratch Building Parts & Accessories |
SCCJ-A2 |
$15.95 |
Slot Classic Adjustable Wheelbase 1/32 Injection Molded Plastic Chassis - Ideal for Hard Body or Lexan Body Scratch Building - Made to fit CAN END drive Mabuchi type motors - Manufactured in Spain - Minimum wheelbase 2.5" (64mm) - Maximum wheelbase 3.38" (86mm) - Use of TSRF TSP1 guide flag and Slot.it SIPA02 bushings are recommended. Assembly Instructions : PDF HMTL
To ORDER please click here to use our online shopping system. |
|
PCS32 |
$15.95 |
Pit Stop Adjustable Wheelbase 1/32 Plastic Chassis - Ideal for Hard Body or Lexan Body Scratch Building - Made to fit ENDBELL drive Mabuchi type motors - Manufactured in the UK - Minimum wheelbase 2.64" (67mm) - Maximum wheelbase 3.58" (91mm) - Minimum width 1.00" (25mm) - Maximum width 1.69" (43mm) - Minimum tire diameter 0.71" (18mm) (with 0.040" [1mm] ground clearance) - Use of TSRF TSP1 guide flag and Slot.it SIPA02 bushings in the rear are recommended - Pictures of typical assembled chassis : pic1 pic2 pic3
To ORDER please click here to use our online shopping system. |
|
PT090 |
$8.95 |
Pro-Track 3/32" Inside Diameter Ball Bearings - 3/16" Outside Diameter Flanged - 2 bearings / package - Use with Pro-Track Spider Chassis, Brass Motor Mounts BW50010 or PMTR5012, or glue in place for 1/32 plastic chassis application - use with drill blank axles PMTR1034 or Slot.it axles
To ORDER please click here to use our online shopping system. |
|
JK5030 |
$4.50 |
JK products 64 pitch inline axle gear for 3/32" axle - 30 teeth - use only 64 pitch pinion gears - can be used with 1/32 inline plastic chassis cars if spacers are used to hold the gear in place
To ORDER please click here to use our online shopping system. |
|
JK5032 |
$4.50 |
JK products 64 pitch inline axle gear for 3/32" axle - 31 teeth - (representative picture shown) use only 64 pitch pinion gears - can be used with 1/32 inline plastic chassis cars if spacers are used to hold the gear in place
To ORDER please click here to use our online shopping system. |
|
JK5032 |
$4.50 |
JK products 64 pitch inline axle gear for 3/32" axle - 32 teeth - use only 64 pitch pinion gears - can be used with 1/32 inline plastic chassis cars if spacers are used to hold the gear in place
To ORDER please click here to use our online shopping system. |
|
JK5035 |
$4.50 |
JK products 64 pitch inline axle gear for 3/32" axle - 35 teeth - (representative picture shown) use only 64 pitch pinion gears - can be used with 1/32 inline plastic chassis cars if spacers are used to hold the gear in place
To ORDER please click here to use our online shopping system. |
|
AML1077C |
$1.49 |
Pair of genuine Oilite oil impregnated sintered bushings - 1/4" outside diameter, 3/32" inside diameter - flanged
To ORDER please click here to use our online shopping system. |
|
PMTR1021 |
|
$1.25 |
1 pair 1/8" x 1/4" flanged axle Oilite oil impregnated sintered bushings
To ORDER please click here to use our online shopping system. |
PMTR1073 |
|
$1.49 |
Low friction style Oilite oil impregnated sintered bushings- 3/32" ID x 3/16" OD flanged - 1 pair / package
To ORDER please click here to use our online shopping system. |
PMTR1074 |
|
$1.25 |
Oilite oil impregnated sintered bushings - 1/8" ID x 3/16" OD flanged - 1 pair / package
To ORDER please click here to use our online shopping system. |
PMTR1081 |
$19.95 |
Professor Motor Chassis Kit - Vintage Style Brass Rod Side Rails - Includes robust stamped motor bracket for Fox / Cheetah / Falcon style motors, brass drop arm, 1/16" brass tube for body mounts (via pins), precut front & rear axle tubes, brass tube and rod for drop arm pivot. Makes 1/32 sports car or F1 / Indy style chassis.
To ORDER please click here to use our online shopping system. |
|
PMTR5012 |
$5.95 |
Stamped brass motor bracket for scratch building - mounts Cheetah / Falcon / Little Ripper / TSRF type motors. Motor has 1/16" offset at top edge of bracket - allows for flush to bottom mount or raised motor position to allow for larger diameter tire use. Rear axle mounts 2 ways - use 7/32" brass tube with 3/16" bushings or open holes to 1/4" for 1/4" bushings or bearings
To ORDER please click here to use our online shopping system. |
|
PMTR5013 |
$3.95 |
Stamped brass drop arm for scratch building - accepts 3/16" post guide flag - 3/4" wide
To ORDER please click here to use our online shopping system. |
|
COB1010 |
$1.95 |
Cobra brass drop arm stamping for scratch building - fits 3/16" post guide flag - 0.050" thick brass - 0.75" wide
To ORDER please click here to use our online shopping system. |
|
BW50010 |
$10.00 |
BWA Billet machined brass motor bracket for scratch building - mounts Cheetah / Falcon / Little Ripper / TSRF & 16D type motors. May be used for 1/32 or 1/24 scale chassis building. Bracket has 3/16" bore for axle bushings or ball bearings & 0.047" diameter holes for frame rails at the bottom of the motor mounting face. Use PMTR1073 bushings for 3/32" axle & PMTR1074 for 1/8" axles.
To ORDER please click here to use our online shopping system. |
|
KS127 |
$.79 |
K&S Engineering Round Brass Tubing - 1/8" Outside Diameter x 12" long (3.2mm x 300mm) - 0.014" wall thickness - 1 pc. per package
To ORDER please click here to use our online shopping system. |
|
KS129 |
$.89 |
K&S Engineering Round Brass Tubing - 3/16" Outside Diameter x 12" long (4.7mm x 300mm) - 0.014" wall thickness - 1 pc. per package
To ORDER please click here to use our online shopping system. |
|
KS130 |
$1.49 |
K&S Engineering Round Brass Tubing - 7/32" Outside Diameter x 12" long (5.6mm x 300mm) - 0.014" wall thickness - 1 pc. per package - 3/16" O.D. bushings or bearings fit inside of this size tubing
To ORDER please click here to use our online shopping system. |
|
KS131 |
$.99 |
K&S Engineering Round Brass Tubing - 1/4" Outside Diameter x 12" long (6.4mm x 300mm) - 0.014" wall thickness - 1 pc. per package
To ORDER please click here to use our online shopping system. |
|
KS132 |
$1.29 |
K&S Engineering Round Brass Tubing - 9/32" Outside Diameter x 12" long (7.1mm x 300mm) - 0.014" wall thickness - 1 pc. per package - 1/4" OD bushings or bearings fit inside of this size tubing
To ORDER please click here to use our online shopping system. |
|
KS152 |
$1.39 |
K&S Engineering Square Brass Tubing - 5/32" Outside Diameter x 12" long (3.9mm x 300mm) - 0.014" wall thickness - 1 pc. per package
To ORDER please click here to use our online shopping system. |
|
KS1251 |
$1.59 |
K&S Engineering Brass Tubing - 1/16" Outside Diameter x 12" long (1.5mm x 300mm) - 3 pcs. per package
To ORDER please click here to use our online shopping system. |
|
KS1626 |
$1.19 |
K&S Engineering Solid Brass Rod - 1/16" Outside Diameter x 12" long (1.5mm x 300mm) - 3 pcs. per package
To ORDER please click here to use our online shopping system. |
|
LB1020 |
$24.95 |
Lucky Bob's Racing Products Chassis Jig - For 1/32 or 1/24 chassis building - Corian material - adjustable guide length in T-slot groove - includes locating pins for 1/8" and 3/32" axles
To ORDER please click here to use our online shopping system. |
|
P573 |
$11.59 |
Parma International 1/32 Womp-Womp Chassis - Brass Inline Motor Mount - Accepts 16D or C-Can motors - Use with 1/4" rear bushings / bearings & 1/8" front axles
To ORDER please click here to use our online shopping system. |
|
P575 |
$15.99 |
Parma International 1/32 "International 32" Chassis - Brass Anglewinder motor Mount - Accepts 16D or C-Can style motors - Use with 3/16" rear bushings & 1/16" front axle (front axle included)
To ORDER please click here to use our online shopping system. |
|
PS310 |
$22.00 |
Pro Slot 1/32 Demon Brass Chassis for use with vacuum formed bodies
To ORDER please click here to use our online shopping system. |
|
PT340 |
$19.99 |
Pro Track 1/32 Chassis Kit - Light Weight Fiberglass
To ORDER please click here to use our online shopping system. |
|
PT341 |
$29.95 |
Pro Track 1/32 "Spider" Chassis Complete Accessory Kit - Includes Mabuchi Style Motor, Front & Rear Aluminum Setscrew Foam Wheels / Tires, Gears, Axles, Allen wrench, Guide, Bushings, Body Mounts & Instructions - Use with PT340 Spider Chassis Kit
To ORDER please click here to use our online shopping system. |
|
PT376 |
$2.00 |
#4-40 Nylon Fastener Kit for 1/32 Pro Track "Spider" Chassis
To ORDER please click here to use our online shopping system. |
|
PT397 |
$54.95 |
Pro Track 1/32 "Spider" Complete RTR (Ready to Run) Assembled Kit (Less Body) - Includes Mabuchi Style Motor, Front & Rear Aluminum Setscrew Foam Wheels / Tires, Gears, Axles, Allen wrench, Guide, Bushings, Body Mounts & Instructions - Recommended mods : 1. Use PMTR1069 axle (Pro Track axle not hardened) 2. Use BW32003 or BW32004 rear wheels 3. Use IG6002 Silicone rear tires (glue on with Permatex 65A recommended) & space the wheels out with PMTR1012 spacers. Comparison of the stock tires to recommended aluminum wheels & silicones : link
To ORDER please click here to use our online shopping system. |
|
SCH1810013 |
$44.95 |
Schöler Brass Pan Adjustable Wheelbase Chassis - 1/32 Sports Car / Stock Car Style - Ideal for Hard Body or Lexan Body Non-Magnet Racing - Made to fit Fox / Falcon / TSRF or other "S" can Mabuchi Motors & also 16D or C-Can Style - Made in Germany - 6mm axle bearing holes in the front & rear brackets (use 6mm ball bearings & 3mm axles from the Motor Modern catalog or use US style 1/4" O.D. bushings to allow use of 1/8" or 3/32" axle - ream open the chassis hole or spin bushings in drill or Dremel to file down O.D.)
To ORDER please click here to use our online shopping system. |
|
SPR1050 |
$10.78 |
Sprints Plus 1/32 Chassis - Brass Inline Motor Mount - Accepts 16D or C-Can style motors - Use with 1/4" rear bushings / bearings & 1/8" front axle
To ORDER please click here to use our online shopping system. |