Professor Motor is proud to offer the finest tools available for a model car racing.  Listed below are the tools currently in our catalog.  Larger illustrations can be found by clicking the link associated with the part number Thank you for your interest in Slot Racing tools distributed by Professor Motor.

Please check stock status in our online shopping if you would like to determine if an item is immediately available.

Part Number

Picture

Price

Description

SL51010

 

NEW !

 

$3.98

Super Lube PTFE Fortified Synthetic Oil - 1/4 oz. (7ml) bottle - Plastic compatible with most plastic materials - recommended as a lubricant for Professor Motor Platinum Series Controllers

 

To ORDER please click here to use our online shopping system.

SL51004

 

NEW !

 

$5.98

Super Lube PTFE Fortified Synthetic Oil - 4 oz. (118ml) bottle - Plastic compatible with most plastic materials - recommended as a lubricant for Professor Motor Platinum Series Controllers

 

To ORDER please click here to use our online shopping system.

CAH60

 

$45.00

Alpha Slot Racing Products Guide Threading Tool - use with 3/16" post commercial style guide

 

To ORDER please click here to use our online shopping system.

CAR70460

$29.99

Carrera Aluminum Carrying Case - foam lined with moveable partitions - reinforced corners - holds 8 1/32 cars

 

To ORDER please click here to use our online shopping system.

CAR70461

$48.99

LARGE Carrera Aluminum Carrying Case - foam lined with moveable partitions - reinforced corners - holds 1/24 cars or LOTS of 1/32 cars (place cars in poly bag on the side)

 

To ORDER please click here to use our online shopping system.

D409

$6.90

Dremel Cut-Off Discs - Standard Thickness 36 Discs / Package - Use Safety Glasses when using

 

To ORDER please click here to use our online shopping system.

H103100

 

$175.00

Hudy Tire Truing Machine - Requires external power supply (10 amp recommended) - designed for truing 3/32" or 1/8" axle tires - includes switch & wire harness to connect / disconnect unit from power supply 

 

To ORDER please click here to use our online shopping system.

PMTR1014

 

NEW !

 

$14.95

Professor Motor Gear Puller for 2mm motor shaft pinions - Very high quality materials at a very reasonable price

 

To ORDER please click here to use our online shopping system.

H107100

 

$40.60

Hudy Pinion Gear Press for any 2mm shaft motor - unique spring loaded pin design

 

To ORDER please click here to use our online shopping system.

L104

$5.89

LaBelle Industries Light Weight (low viscosity) Synthetic Multi-Purpose Oil - 1/2 fluid ounce (14.9 ml) plastic squeeze bottle with stainless steel needle point applicator - NOT plastic compatible - use recommended for motor bushings (high speed & high temperature) 

 

To ORDER please click here to use our online shopping system.

SL21010

$3.69

Super-Lube PTFE (Teflon derivative) - 1/2 fluid ounce (14.9 ml) plastic squeeze tube applicator - fully plastic compatible - use recommended for sidewinder and inline brass & plastic axle gears (high load applications) 

 

To ORDER please click here to use our online shopping system.

LB1001C

 

NEW !

$5.00

Lucky Bob's Racing Products Tech Block - For 1/32 or 1/24 cars - Clear Acrylic Material - All colors shown in picture  

 

To ORDER please click here to use our online shopping system.

LB1002S

 

NEW !

$6.00

Lucky Bob's Racing Products Tech Block - For 1/32 or 1/24 cars - Smoke Color Acrylic Material - All colors shown in picture  

 

To ORDER please click here to use our online shopping system.

LB1003G

 

NEW !

$6.47

Lucky Bob's Racing Products Tech Block - For 1/32 or 1/24 cars - Florescent Green Acrylic Material - All colors shown in picture  

 

To ORDER please click here to use our online shopping system.

LB1004R

 

NEW !

$6.47

Lucky Bob's Racing Products Tech Block - For 1/32 or 1/24 cars - Florescent Red Acrylic Material - All colors shown in picture  

 

To ORDER please click here to use our online shopping system.

LB1005B

 

NEW !

$6.47

Lucky Bob's Racing Products Tech Block - For 1/32 or 1/24 cars - Florescent Blue Acrylic Material - All colors shown in picture  

 

To ORDER please click here to use our online shopping system.

LB1020

$24.95

Lucky Bob's Racing Products Chassis Jig - For 1/32 or 1/24 chassis building - Corian material - adjustable guide length in T-slot groove with locating pins for 1/8" or 3/32" axles 

 

To ORDER please click here to use our online shopping system.

MAG1001

 

$99.95

"Magnet Marshall" Precision Electronic Scale & Magnetic Downforce Measuring Tool - Easy to read digital electronic display - car not included - for review & product uses please click here : SCI Review

 

To ORDER please click here to use our online shopping system.

MP60014

 

$24.95

"Mini Phaser" Solid State Electronic Controller - Easy read dial with on-off light & 6 foot 3 wire grounded power cord - Use with any soldering iron to limit maximum temperature & extend tip life - Use with any DC motor type tool (up to 400 watts) such as a Dremel to control speed - turns a single speed tool into a variable speed tool

 

To ORDER please click here to use our online shopping system.

MU3304

 

$2.25

Mura "Tigers Milk" Braid Juice - 2 oz. bottle with spout applicator - keeps braid clean, reduces braid wear and reduces running friction against track

 

To ORDER please click here to use our online shopping system.

N30124

$11.95

Ninco soft sided zippered nylon carrying case - holds 6 cars plus controller(s) and parts - foam compartments inside to cushion the goodies - adjustable shoulder strap for carrying - very nicely made 

 

To ORDER please click here to use our online shopping system.

N80201

$17.98

Ninco combination gear puller & gear press - aluminum cast housing

 

To ORDER please click here to use our online shopping system.

PMTR1010

$1.00

Air gap mate motor building tool - 1 / package - use with any air gap tool - Intended uses : helps to set up brush hood hardware so that the brush hoods are a consistent distance & not interfering with the motor commutator, holds bushings or bearings in place in the motor when they are glued or soldered in and also helps to press in 5mm size ball bearings (use end with recess) without pressing on the bearing inner race and possibly causing damage

 

To ORDER please click here to use our online shopping system.

PMTR1031

 

$4.95

#2-56 NC HSS (High Speed Steel) Spiral Point Machine Screw Plug Tap

 

To ORDER please click here to use our online shopping system.

PS609

 

$8.50

Pro Slot "Pro Turn" 0.050" (1.27mm) Precision Allen Driver - 5 year manufacturers replacement warranty against tip stripping or breaking

 

To ORDER please click here to use our online shopping system.

PS1000

 

NEW !

 

$2.00

Pro Slot 1/32 Display case - Some boxes have mirrored inside backing, some do not - Some boxes are painted with metallic paint - Includes Clear Acrylic Lid (NOT SHOWN) - Car not included

 

To ORDER please click here to use our online shopping system.

SIPA06

 

$2.99

Slot.it Pro Axle System Allen Wrench - 0.9mm (0.035") for Slot.it setscrews in wheels & gears

 

To ORDER please click here to use our online shopping system.

SIPA22

 

$8.99

Slot.it 0.9mm (0.035") Screwdriver type tire / gear wrench with machined tip for Slot.it setscrews in wheels & gears

 

To ORDER please click here to use our online shopping system.

SIPA23

 

$14.99

Slot.it 0.9mm (0.035") Screwdriver type tire / gear wrench with machined tip - torque limiting design for Slot.it setscrews in wheels & gears

 

To ORDER please click here to use our online shopping system.

WI153-05

 

NEW !

 

$4.25

Wiha Brand #0 Phillips Precision Screwdriver - Made in Germany - fits smaller  slot car body screws

 

To ORDER please click here to use our online shopping system.

WI153-10

 

NEW !

 

$5.75

Wiha Brand #1 Phillips Precision Screwdriver - Made in Germany - fits most slot car body screws / controller screws, etc.

 

To ORDER please click here to use our online shopping system.

WI263-09

 

$5.50

Wiha Brand 0.035" (0.9mm) Precision Allen Driver - Made in Germany

 

To ORDER please click here to use our online shopping system.

WI263-13

 

NEW !

 

$4.75

Wiha Brand 0.050" (1.3mm) Precision Allen Driver - Made in Germany

 

To ORDER please click here to use our online shopping system.

 

 

home  retail shopping  wholesale dealer program  email
browse one of our catalogs :
ANALOG cars & parts : artin  carrera 132   carrera 124  cartrix  fly & gb track  hard body 1/24 

historic scale racing replicas  maxi models  mrrc  monogram  ninco

nsr  pro slot  racer  scalextric analog  scx  slot.it  sloter  spirit  1/32 cars - other 

ANALOG sets : carrera 132  carrera 124  ninco  scalextric

DIGITAL cars :   carrera DIGITAL 132  ninco N-Digital  scalextrix DIGITAL

DIGITAL sets & Accessories :  carrera132  carrera124  ninco N-Digital  scalexric

SERVICE & high performance : carrera  monogram  mrrc/scale auto  ninco  nsr

professor motor  scalextric  scalextric sport plus  slot.it

GENERIC parts : 1/32 bodies  1/32 scratch building  1/24 parts  1/24 bodies

  "TIRE CENTRAL" :  wheels, tires, inserts, starter kits, tires that fit, silicones, etc.

OTHER Items :  books  professor motor controllers  slot.it controllers  controller parts

decals - vintage  decals - other  drag racing  hardware  jk products  lap counter & timer systems

motor modern  motors  overdrive slotservice  tools    vintage & reproduction parts

 TRACK & track accessories : artin  carrera  scalextric  buildings & scenery  track wiring & power

Distributed by : Professor Motor INC, 38291 Schoolcraft Road - Suite 104, Livonia MI 48150-5042  USA
Phone (734) 462-4226 Fax (734) 462-4211  Email : professor@professormotor.com
www.professormotor.com

Return Home