 |
Slot.it "Ergal" Aluminum anodized setscrew ANGLEWINDER Light gear - Black 27 Teeth 16mm Outside Diameter - fits 3/32" (2.37mm) rear axle - uses M2 setscrew accepting 0.9mm (0.035") Allen wrench - use only with 6.5mm Outside Diameter sidewinder type pinion gears or 6.0mm OD Pinions if the Flat 6 Motor is used
Application Note – For Anglewinder Installation in the Slot.it Audi R8C, Scale Auto Radical SR9 and the Scale Auto Toyota GT1 the Flat 6 type motor must be used because of limited clearance under the body. For the Audi R8C use a 6.5mm OD Pinion with the 15mm OD Axle Gear (SIGA1524 / SIGA1525 / SIGA1526) along with a 1mm spacer behind the gear, or alternately use a 6.0mm OD Pinion with a 16mm OD Axle Gear (SIGA1627 / SIGA1628 / SIGA1629) with a 0.75mm spacer behind the gear.
For alternate views please click on "Larger Photos"
Gear Ratio Application Chart & Technical Information : LINK
Universal Gear Ratio Chart for Any Scale / Type of Gears (PDF) : PDF
|
|
|
