Sloting Plus Universal "Evo Tube" Bushings - Low friction leaded brass - for 3/32" (2.38mm) axles - for chassis with 4.6 to 5mm holes between flanges - 2 bushings / package - Snaps into most brands of 1/32 scale chassis
The second bearing, after the model -HIPER LUB-, designed and manufactured by Sloting Plus with a groove inside that acts as a reserve tank for the lubricant in addition to minimizing the friction surface.
This bearing, like the model that precedes it, is the only one in the world with this special feature that gives it the ability to keep the bearing and shaft lubricated longer and, as can be seen in the photograph, has two points of support of smaller surface.
This new model replaces, definitely, the UNIVERSAL model that we marketed because its benefits far exceed this one and, like the previous one, it is compatible with all traditional plastic or 3D anchors of between 4.6 and 5 mm. in diameter.
REMEMBER: To ensure proper operation, reliability and durability of a brass bearing it is VERY IMPORTANT to lubricate regularly and generously. We also recommend gluing the brass bearings with a "contact" type glue and never with cyanoclirate type glues.
