Home > Brands Available >

Bob Smith Industries BSI-106 Insta-Cure + GAP FILLING CA Glue 1/2 Ounce
Bob Smith Industries BSI-106 Insta-Cure + GAP FILLING CA Glue 1/2 Ounce
 
Our Price : $3.99

Quantity in Stock :(out of stock)

Free Shipping
Part Number : BSI-106
Qty :

Description
 
Bob Smith Industries Insta-Cure+ GAP FILLING CA Glue (Cyanoacrylate Adhesive) 1/2 Fluid Ounce (14.8ml)

This INSTA-CURE+™ Gap Filling CA Glue is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as lamination's, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.

Recommended Use : Securing bronze axle bushings to (plastic) chassis bushing carriers where the bushing does not fit snugly in the carrier. Apply a drop to the base of the bushing carrier before installing the bushings (you'll need to work quickly). Apply a drop to the outer bushing flanges where they meet the bushing carrier and a drop on top of the bushing being careful to keep the glue between the bushing's outer flanges. To prolong the useful life of Insta-Cure, we strongly recommend refrigerating when not in use.
SAFETY WARNINGS !!
  • Testors Super Glue bonds instantly, so we do not recommend its use by children under the age of 13 with out parental supervision


Browse for more products in the same category as this item:

Brands Available
Products Available > Tools / Cases
Brands Available > Brands A - O > BOB SMITH INDUSTRIES
Brands Available > Brands A - O
Products Available


Sloting Plus SP395001 UNIVERSAL 1/32 Lexan Molded Interior "ALCANIZ" $4.49